Advantech EKI-9228G-8CMI, User Manual

Page: 106 / 324

EKI-9228G Series User Manual 88
4.3.4 Configuration Storage
4.3.4.1 Save
Use the Save All Applied Changes page to store the system's configuration settings
to non-volatile memory. Once saved the settings are available across a system reset.
When you click Save, the save action is initiated.
To access this page, click System > Configuration Storage > Save.
Figure 4.83 System > Configuration Storage > Save
The following table describes the items in the previous figure.
4.3.4.2 Reset
Use the Reset Configuration page to reset the system's parameters to the factory
default settings. The Reset function overrides all previously saved configuration
changes. When you click Reset, the reset action is initiated.
To access this page, click System > Configuration Storage > Reset.
Figure 4.84 System > Configuration Storage > Reset
The following table describes the items in the previous figure.
4.3.4.3 Erase Startup
Use the Erase Startup page to delete the text-based configuration file. The file is
stored in non-volatile memory. When you click Reset, the Erase Startup action is initi-
ated.
To access this page, click System > Configuration Storage > Erase Startup.
Figure 4.85 System > Configuration Storage > Erase Startup
Item Description
Save Click Save to initiate a save of all system configuration after display-
ing a confirmation message. All of the current system configuration
settings, including any that have been changed by the user, are stored
into non-volatile memory so that they are preserved across a system
reset.
Item Description
Reset Click Reset to initiate the action to reset all configuration parameters
to their factory default settings after displaying a confirmation mes-
sage. All configuration changes, including those that were previously
saved, are reset in the running system by this action. It is possible that
the IP address of the switch will change. If this occurs you will need to
determine the new IP address to access the device using the web.