Advantech EKI-9228G-8CMI, User Manual

Page: 103 / 324

85 EKI-9228G Series User Manual
The following table describes the items in the previous figure.
To add a new policy list:
Click System > Advanced Configuration > Event Manager > Policy List > Add.
Figure 4.79 System > Advanced Configuration > Event Manager > Policy List >
Add
The following table describes the items in the previous figure.
Policy Selection
Item Description
List Name The name of the policy list. This field can be configured only when
adding a new policy list.
Event Options The method(s) used to decide which events will be applied to event
alarm action (Alarm LED, Alarm Relay, Alarm Relay 2, Logging, or
Trap).
List Type The type of list, which is one of the following:

Default: The list is preconfigured on the system. This type of list
cannot be deleted, and only the Event Options are configurable.

Configured: The list has been added by a user.
Refresh Click Refresh to update the screen.
Add Click Add to add a new policy list.
Edit Click Edit to edit the selected entries.
Item Description
List Name The name of the policy list. This field can be configured only when
adding a new policy list.
Event Options The method(s) used to authenticate a user who attempts to access
the management interface or network. The possible methods are as
follows:

Link Change Members: The port(s) included in the link-change
event. If the event that meets the policy criteria that is in the Link
Change Members list, it is applied to Alarm LED, Alarm Relay,
Alarm Relay 2, Logging, or Trap. To add source ports to the pol-
icy, select one or more ports from the Available Port List field
(CTRL + click to select multiple ports). Then, use the appropriate
arrow icon to move the selected ports to the Link Change Mem-
bers field.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.