Advantech EKI-7712 Series, User Manual

Page: 126 / 177

EKI-7720 Series User Manual 111
4.8.3 Rate Limit
Rate Limits features control on a per port basis. Bandwidth control is supported for
the following: Ingress Bandwidth Control, Egress Bandwidth Control and Egress
Queue.
4.8.3.1 Ingress Bandwidth Control
The Ingress Bandwidth Control page allows you to configure the bandwidth control
for a listed port.
To access this page, click
QoS > Rate Limit > Ingress Bandwidth Control .
Figure 4.162 QoS > Rate Limit > Ingress Bandwidth Control
The following table describes the items in the previous figure.
To access this page, click
QoS > Rate Limit > Ingress Bandwidth Control
.
The following figure displays the
Ingress Bandwidth Control Recover Time
set -
tings.
Figure 4.163 QoS > Rate Limit > Ingress Bandwidth Control
To access this page, click QoS > Rate Limit > Ingress Bandwidth Control .
The following figure displays the Ingress Bandwidth Control Status settings.
Figure 4.164 QoS > Rate Limit > Ingress Bandwidth Control
4.8.3.2 Egress Bandwidth Control
The Egress Bandwidth Control page allows you to set the egress bandwidth control
for a listed port.
Item Description
Port Enter the port number for the rate limit setup.
State Select
Disabled
or
Enabled
to set the port’s state status.
Rate (Kbps) Enter the value in Kbps (16 to 1000000) to set as the bandwidth rate
for the selected port.
Action Select the Ingress port action to be Drop or Shutdown.
Apply Click Apply to save the values and update the screen.