Advantech EKI-7706 Series, User Manual

Page: 145 / 165

132 EKI-7706 Series User Manual
4.11.4 Dual Image
The Dual Image page allows you to setup an active and backup partitions for
firmware image redundancy.
This page is depending on the current model.
Figure 4.140 Tools > Dual Image
The following table describes the items in the previous figure.
The ensuing table for Image Information 0/1 lists the following settings
(informational only):
Flash Partition, Image Name, Image Size and Created Time
4.11.5 Save Configuration
To access this page, click Tools > Save Configuration .
Click Save Configuration to FLASH to have configuration changes you have made
to be saved across a system reboot. All changes submitted since the previous save
or system reboot will be retained by the switch.
4.11.6 User Account
The User Account page allows you to setup a user and the related parameters.
To access this page, click Tools > User Account .
Figure 4.141 Tools > User Account
The following table describes the items in the previous figure.
Item Description
Active Image Click the format for the image type: EKI-7706-AE-1-01-01.hex (Active)
or EKI-7706-AE-1-00-97.hex (Backup).
Save Click Save to save and keep the new settings.
Item Description
User Name Enter the name of the new user entry.