Advantech EKI-7706 Series, User Manual

Page: 114 / 165

EKI-7706 Series User Manual 101
The ensuing table for FE1 Egress Per Queue Status lists the following settings
(informational only):
Queue Id and Egress Rate Limit (Kbps)
4.8.4 Bandwidth Guarantee
4.8.4.1 Global Settings
To access this page, click QoS > Bandwidth Guarantee > Global Settings .
Figure 4.99 QoS > Bandwidth Guarantee > Global Settings
The following table describes the items in the previous figure.
The ensuing table for Ingress Bandwidth Control Status lists the following settings
(informational only):
Status, Guarantee Bandwidth, Guarantee Type, UDP Source Port and Force
Mode
State Click Disabled or Enabled to set the Egress queue state.
CIR (Kbps) Enter the value in Kbps (16 to 1000000) to set the CIR rate for the
Egress queue.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
Status Click Disabled or Enabled to set the guarantee bandwidth.
Guarantee Band-
width Enter the value for the guarantee bandwidth.
Type Click UDP Source Port or RTP H.264 to set the guarantee bandwidth
type.
UDP Source Port Enter the port number for the UDP source.
Force Mode Click the check box to enable the force mode.
Apply Click Apply to save the values and update the screen.