ZP5 - USSR Zone 4
+5 hours
5 pm
ZP6 - USSR Zone 5
+6 hours
6 pm
WAST - West Australian Standard
+7 hours
7 pm
CCT - China Coast, USSR Zone 7
+8 hours
8 pm
JST - Japan Standard, USSR Zone 8
+9 hours
9 pm
EAST - East Australian Standard GST
Guam Standard, USSR Zone 9
+10 hours
10 pm
IDLE - International Date Line
NZST - New Zealand Standard
NZT - New Zealand
+12 hours
Midnight
•
SNTP Sever URL:
Set the SNTP server IP address.
•
Switch Timer:
Displays the current time of the switch.
•
Daylight Saving Period:
Set up the Daylight Saving beginning time and Daylight Saving ending time.
Both will be different in every year.
•
Daylight Saving Offset (mins):
For non-US and European countries, specify the amount of time for
day light savings.
•
Synchronization Interval (secs):
The Synchronization Interval is used for sending synchronizing
packets periodically. Users can assign the time ranging from 64 to 1024 seconds. The “0” value
displaying by default means that you disable the auto-synchronized feature in the SNTP client mode.
You can enable the feature by filling the interval range from 64 ~ 1024 seconds.
•
Click
Apply
.
Figure 3.20: SNTP Configuration
EKI-6558TI_EKI-6559TMI_Manual_ed2
52
