EKI-6333AC-M12 Series User Manual
23
3.4.2.5
Access Control
The Access Control feature is only available when the wireless mode of the device is
set to AP, see “Basic” on page 20.
Access Control allows for an administrator to allow or deny access by defining
specific devices through their MAC address.
To access this page, click
Wireless Settings
>
WLAN
>
Access Control
.
Figure 3.10 Wireless Settings > WLAN > Access Control
The following table describes the items in the previous figure.
Tx packets/bytes
Displays the total Tx packets and corresponding bytes.
Rx packets/bytes
Displays the total Rx packets and corresponding bytes.
Wlan status
TX packets
Display the current Tx packets.
TX bytes
Display the current Tx bytes.
RX packets
Display the current Rx packets.
RX bytes
Display the current Rx bytes.
Item
Description
Item
Description
Access Control Method
Click the drop-down menu to set the access control method:
Disable, Deny or Allow.
In the Deny or Allow menu, enter the MAC address of the target
device - support for up to 32 target devices.
Submit
Click
Submit
to save the values and update the screen.
