EKI-6333AC-M12 Series User Manual
19
3.3
Network Settings
3.3.1
LAN
To access this page, click
Network Settings
>
LAN
.
Figure 3.4 Network Settings > LAN
The following table describes the items in the previous figure.
Item
Description
Local Hostname
Enter the device name: up to 31 alphanumeric characters.
Network mode
Click the drop-down menu to select the IP Address Setting mode:
Static or DHCP client.
IP Address
Enter a value to specify the IP address of the interface. The default
is 192.168.1.1.
Subnet Mask
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Default Gateway
Enter a value to specify the default gateway for the interface.
Primary DNS Server
Enter a value to specify the primary DNS server for the interface.
Secondary DNS Server
Enter a value to specify the secondary DNS server for the
interface.
MAC Address
Display the MAC address to which packets are statically
forwarded.
DHCP Server
Select
Enabled
or
Disabled
to designate the DHCP server
function type. When a new DHCP server mode is selected, the
switch requires a system restart for the new mode to take effect.
Start IP Address
Enter starting a IP address for the IP assignment.
Pool Counter
Enter a variable to define the number of IP addresses for a given
network.
Leasetime
Enter in the value designating the lease time for the DHCP server.
Submit
Click
Submit
to save the values and update the screen.
Note!
All new configurations will take effect after rebooting. To reboot the
device, click
Administration
>
Tools
>
Reboot
.
