83
EKI-6333AC-4GP User Manual
Figure 3.110 Field Communication > Bus & Protocol > Virtual COM > Data
Packing (for TCP Client, TCP Server and UDP operation mode)
Figure 3.111
The following table describes the items in the previous figure.
Figure 3.112 Field Communication > Bus & Protocol > Virtual COM > Legal Host
IP/FQDN Definition (for TCP Client operation mode)
When
Edit
button is applied, a screen similar to this appears.
Figure 3.113 Field Communication > Bus & Protocol > Virtual COM > Legal Host
IP/FQDN Definition (for TCP Client operation mode)
The following table describes the items in the previous figure.
Item
Description
Data Buffer Length
Enter the data buffer length for the serial port.
Value Range: 0 ~ 1024.
Delimiter Character 1
Check
Enable
checkbox to activate the delimiter character 1, and
enter the Hex code for it.
Value Range: 0x00 ~ 0xFF.
Delimiter Character 2
Check
Enable
checkbox to activate the delimiter character 2, and
enter the Hex code for it.
Value Range: 0x00 ~ 0xFF.
Data Timeout Transmit
Enter the data timeout interval for transmitting serial data through
the port. By default, it is set to 0 and the timeout function is
disabled.
Value Range: 0 ~ 1000ms.
Save
Click
Save
to save the settings.
Undo
Click
Undo
to cancel the settings.
Item
Description
To Remote Host
Click
Edit
to enter IP address or FQDN of the remote TCP server
to transmit serial data.
Remote Port
Enter the TCP port number. This is the listen port of the remote
TCP server.
Value Range: 1 ~ 65535.
Serial Port
Apply the TCP server connection for a selected serial port. Up to 4
TCP servers can be configured at the same time for each serial
port.
