Advantech EKI-6333AC-4GP User Manual Download Page 89

Page: 89 / 143

EKI-6333AC-4GP User Manual

3.4.4.3

Trusted Certificate

To access this page, click

Object Definition

Certificate

Trusted Certificate

The

Trusted Certificate

screen allows user to import trusted certificates and keys.

Figure 3.95 Object Definition > Certificate > Trusted Certificate > Trusted CA

Certificate List

When

Import

button is applied, the

Trusted CA Import

screen appears. You can

import a Trusted CA certificate from an existed certificate file, or directly paste a PEM
encoded string as the certificate.

Figure 3.96 Object Definition > Certificate > Trusted Certificate > Trusted CA

Certificate Import from a File

The following table describes the items in the previous figure.

Figure 3.97 Object Definition > Certificate > Trusted Certificate > Trusted CA

Certificate Import from a PEM

The following table describes the items in the previous figure.

Item

Description

Choose File

Click

Choose File

to select a CA certificate file from user’s

computer.

Apply

Click

Apply

to import the specified CA certificate to the gateway.

Cancel

Click

Cancel

to discard the import operation and the screen will

return to the

Trusted Certificates

page.

Item

Description

Text filed

This is an alternative approach to import a CA certificate. You can
directly fill in (Copy and Paste) the PEM encoded CA certificate
string.

Apply

Click

Apply

to import the specified CA certificate to the gateway.

Cancel

Click

Cancel

to discard the import operation and the screen will

return to the

Trusted Certificates

page.

Summary of Contents for EKI-6333AC-4GP
















































































































































Search results

Summary of Contents for EKI-6333AC-4GP

Reviews:

Related manuals for EKI-6333AC-4GP

Brands by name

Popular brands

Advantech EKI-6333AC-4GP, User Manual

Search results

Summary of Contents for EKI-6333AC-4GP

Reviews:

Related manuals for EKI-6333AC-4GP

Brands by name

Popular brands