65
EKI-6333AC-4GP User Manual
Figure 3.76 Basic Network > IPv6 > Configuration > Address Auto-
configuration
The following table describes the items in the previous figure.
3.3.5
QoS
The total amount of data traffic increases nowadays as the higher demand of mobile
applications, like Game / Chat / VoIP / P2P / Video / Web access. In order to pose
new requirements for data transport, e.g. low latency, low data loss, the entire
network must ensure them via a connection service guarantee.
The main goal of QoS (Quality of Service) is prioritizing incoming data, and
preventing data loss due to factors such as jitter, delay and dropping. Another
important aspect of QoS is ensuring that prioritizing one data flow doesn’t interfere
with other data flows. So, QoS helps to prioritize data as it enters your router. By
attaching special identification marks or headers to incoming packets, QoS
determines which queue the packets enter, based on priority. This is useful when
there are certain types of data you want to give higher priority to, such as voice
packets given higher priority than Web data packets.
To utilize your network throughput completely, administrator must define bandwidth
control rules carefully to balance the utilization of network bandwidth for all users to
access. It is indeed required that an access gateway satisfies the requirements of
latency-critical applications, minimum access right guarantee, fair bandwidth usage
Item
Description
Auto-configuration
Check to enable the auto configuration feature.
Auto-configuration Type Define the selected IPv6 WAN connection type to establish the
IPv6 connectivity.
Select
Stateless
to manage the Local Area Network to be
SLAAC + RDNSS.
Select
Stateful
to manage the Local Area Network to be
Stateful (DHCPv6).
Router Advertisement
Lifetime
The function is available when
Auto-configuration Type
is
Stateless
. Enter the Router Advertisement Lifetime (in seconds).
200 is set by default.
Value Range: 0 ~ 65535.
IPv6 Address
Range(Start)
The function is available when
Auto-configuration Type
is
Stateful
. Enter the start IPv6 address for the DHCPv6 range for
your local computers. 0100 is set by default.
Value Range: 0001 ~ FFFF.
IPv6 Address
Range(End)
The function is available when
Auto-configuration Type
is
Stateful
. Enter the end IPv6 address for the DHCPv6 range for
your local computers. 0200 is set by default.
Value Range: 0001 ~ FFFF.
IPv6 Address Lifetime
The function is available when
Auto-configuration Type
is
Stateful
. Enter the DHCPv6 lifetime for your local computers.
36000 is set by default.
Value Range: 0 ~ 65535.
Save
Click
Save
to save the settings.
Undo
Click
Undo
to cancel the settings.
