EKI-6333AC-4GP User Manual
58
3.3.3.3
Advanced Configuration
To access this page, click
Basic Network
>
WiFi
>
Advanced Configuration
.
Figure 3.66 Basic Network > WiFi > Advanced Configuration
The following table describes the items in the previous figure.
Operation Band
Specify the intended operation band for the WiFi module. Basically,
this setting is fixed and cannot be changed once the module is
integrated into the product. However, there is some module with
selectable band for user to select according to his network
environment. Under such situation, you can specify which
operation band is suitable for the application.
Multiple AP Names
Specify the VAP to show the associated clients information in the
following Client List. By default, All VAP is selected.
IP Address
Configuration & Address
It shows the Client’s IP address and the deriving method.
Dynamic
means the IP address is derived from a DHCP
server.
Static
means the IP address is a fixed one that is self-filled
by client.
Host Name
It shows the host name of client.
MAC Address
It shows the MAC address of client.
Mode
It shows what kind of WiFi system the client used to associate with
this device.
Rate
It shows the data rate between client and this device.
RSSI0
It shows the RX sensitivity (RSSI) value for each radio path.
RSSI1
It shows the RX sensitivity (RSSI) value for each radio path.
Signal
The signal strength between client and this device.
Interface
It shows the VAP ID that the client associated with.
Refresh
Click
Refresh
to shows the information for wireless clients that is
associated with the selected VAP(s).
Item
Description
Item
Description
Module Select
Select the WiFi module to check the information of connected
clients. For those single WiFi module products, this option is
hidden.
Operation Band
Specify the intended operation band for the WiFi module. Basically,
this setting is fixed and cannot be changed once the module is
integrated into the product. However, there is some module with
selectable band for user to select according to his network
environment.
Save
Click
Save
to save the settings.
Undo
Click
Undo
to cancel the settings.
