EKI-6333AC-4GP User Manual
30
3.3
Basic Network
3.3.1
WAN & Uplink
3.3.1.1
Physical Interface
To access this page, click
Basic Network
>
WAN & Uplink
>
Physical Interface
.
The
Physical Interface
screen allows user to setup the physical WAN interface and
to adjust WAN’s behavior.
Figure 3.22 Basic Network > WAN & Uplink > Physical Interface
When
Edit
button is applied, an
Interface Configuration
screen appears. WAN-1
interface is used in this example.
Figure 3.23 Basic Network > WAN & Uplink > Physical Interface > Interface
Configuration
The following table describes the items in the previous figure.
Note!
Numbers of available WAN Interfaces can be different for the purchased
gateway.
Item
Description
Physical Interface
Select one expected interface from the available interface drop-
down menu. It can be
Ethernet
or
WiFi Module
.
Depending on the gateway model, Disable and failover options will
be available only to multiple WAN gateways.
Operation Band
If WiFi module is specified as the physical interface, the Operation
Band item will be displayed for radio band selection.
Specify the radio band for WiFi uplink connection. If the WiFi
module in use is a 2.4G/5GHz selectable module, please select
one band for uplink connection.
Note:
This is only available for 2.4G/5GHz selectable module.
