Advantech EKI-1526/N/I/TI, User Manual

Page: 77 / 107

63 EKI-1526(TI) | 1528(TI) User Manual
6.4 Ethernet Configuration
Choose either
Eth 1
or
Eth 2
in the Ethernet Configuration page.Enter the
corresponding values for your network environment. Remember press
Save
after fill
in all values.
To access this page, click
Ethernet Configuration
.
Figure 6.3 Ethernet Configuration
The following table describes the items in the previous figure.
Time Server Enter the address of the SNTP server. This is a text string of up to 64
characters containing the encoded unicast IP address or hostname of
a SNTP server. Unicast SNTP requests will be sent to this address. If
this address is a DNS hostname, then that hostname should be
resolved into an IP address each time a SNTP request is sent to it.
Save Click
Save
to save the values and update the screen.
Item Description
Item Description
IPv4 Configuration
Mode
Click the drop-down menu to select the IP Address Setting mode:
Static IP, DHCP, or BOOTP.
MAC Address Enter the MAC address to which packets are statically forwarded.
IP Address Enter a value to specify the IP address of the interface. The default is
10.0.0.1 (Eth1) & (0.0.0.2 (Eth2).
Subnet Mask Enter a value to specify the IP subnet mask for the interface. The
default is 255.0.0.0.
Default Gateway Enter a value to specify the default gateway for the interface.