manualshive.com logo in svg

Advantech EKI-1526/N/I/TI, User Manual

Share
Download
Advantech EKI-1526/N/I/TI User Manual Download Page 61

47

EKI-1526(TI) | 1528(TI) User Manual

 

Figure 4.6 USDG Data Mode

4.3.3

USDG UDP Server/Client mode

The USDG  UDP mode  is primarily used for the broadcasting of messages  over a

network. In UDP server mode, data is transmitted from the Host connected to the

EKI-1526(TI)  |  1528(TI)  USDG  UDP  Port  (Default  Port  5300).  In  the  default  UDP

client mode, EKI serial device servers simultaneously transmits UDP messages to a

maximum of 16 peers.
USDG  Data  mode  supports  Data  Idle  Timeout,  Data  Listen  Port,  and  Command

Listen Port parameters.

4.3.3.1

Data Idle Timeout

The  default  is  60  seconds.  If  you  want  to  keep  connection  continually,  you  can

disable the Data Idle Timeout. Data idle Time is the time period for which the device

waits for data. If the EKI-1526(TI) | 1528(TI) does not receive data during established

idle  time,  the  EKI-1526(TI)  |  1528(TI)  will  disconnect  temporarily.  When  the  data

comes in, it will reconnect automatically. Users do not need to reconnect.

4.3.3.2

Data Listen Port

The TCP/UDP port number represents the source port number, and the number is

used to identify the channel for remote initiating connections. The port range is 1024-

65533. If an unknown caller wants to connect to the system and request services,

they must define the TCP/UDP port to carry a long-term conversation.
Each node on a TCP/IP network has an IP address, and each IP address can allow

connection on one or more TCP port. The well-known TCP ports are those that have

been defined;  for  example,  port 23 is  used for Telnet  connections. There are also

custom sockets that users and developers define for their specific needs. The default

TCP/UDP port of the EKI-1526(TI) | 1528(TI) Port1 is 5300, Port2 is 5301, etc. Users

can adjust them according to preference or application. Each port has its own data

listen port to accept the connection requests of other network device. The data listen

port cannot be set to the same value. You can transmit/receive data to/from devices

via the data listen port.

4.3.3.3

Command Listen Port

Each  port  has  its  own  command  listen  port  to  accept  connected  request  of  other

network device, so the command listen port cannot be set to the same value. The

Command Listen Port is different from the Data Listen port.

Summary of Contents for EKI-1526/N/I/TI












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands