manualshive.com logo in svg

Advantech EKI-1500-CE Series, User Manual

Share
Download
Advantech EKI-1500-CE Series User Manual Download Page 57

EKI-1500-CE Series User Manual

46

5.2.2

Manual Mapping

1.

On your desktop, navigate to 

Start

 > 

All Programs

 > 

EKI Device Configura-

tion Utility

 and click 

Advantech EKI Device Configuration Utility

 to open the 

utility.

2.

Under 

Serial Device Servers

, locate your server and click the icon to expand 

the listing

.

3.

Select the target device and right-click on it to open up the options menu win-
dow.

4.

Locate 

Manual Mapping

 and select it. 

Figure 5.5 Selecting Manual Mapping

The 

Manual Mapping Virtual COM Port

 window displays.

5.

In the 

Device

 > 

Serial Port 

drop-down menu, select the target port to map.

This is the physical serial port on the EKI-1500-CE Series device.

6.

In the 

Host

 > 

COM Port

 drop-down menu, select the target COM port to map. 

This is the virtual port on the target PC.

Figure 5.6 Viewing Manual VCOM Mapping Results

VCOM PC Port

EKI Physical
Serial Port

Summary of Contents for EKI-1500-CE Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands