manualshive.com logo in svg

Advantech DVP-7020, User Manual, Page: 10 / 65

Share
Download
Advantech DVP-7020 User Manual Download Page 10

                                           DVP-7020 User’s Manual 

6

body. 

5.

 

Insert the DVP-7020 card into an unused PCI slot. 

Hold the card only by its edges and carefully align it 

with the slot. Insert the card firmly into place. Use of 

excessive force must be avoided; otherwise the card 

might be damaged. 

6.

 

Fasten the bracket of the PCI card on the back panel 

rail of the computer with screws. 

7.

 

Connect appropriate accessories (Video cable to 

camera. if necessary) to the PCI card. 

8.

 

Replace the cover of your computer chassis.   

9.

 

Plug in the power cord and turn on the computer... 

10.

 

Remove the original BT878 driver before the card 

installed if it is present. 

Note: 

Keep the anti-static bag for future use. You might need the 
original bag to store the card if you have to remove the card 
from the PC or transport it elsewhere. 
 
 

1.9    Software / Driver Installation                           

 

Before you begin

 

To facilitate the installation of the enhanced display device 

drivers and utility software, you should read the instructions 

in this chapter carefully before you attempt installation. The 

device drivers for the DVP-7020 board are located on the 

Summary of Contents for DVP-7020


































































Reviews:

No comments