manualshive.com logo in svg

Advantech DLT-V83 SERIES, Manual

Share
Download
Advantech DLT-V83 SERIES Manual Download Page 82

Optional equipment/accessories 
 
 

Page 82 of 122 

DLT-V83 Series Manual V1.50 

Advantech-DLoG 

12.12.  Voice Kit (optional) 

The optional Voice Kit of the DLT-V83 contains a handheld microphone including speaker and 

bracket. The internal speaker of the DLT-V83 is automatically deactivated if the Voice Kit is 

connected. 

The handheld microphone is connected to the Audio/Mic interface of the DLT-V83. 

Please use only handsets from “OTTO Communications”. Please contact your Advantech-DLoG 

sales representative if needed. 

 

Fig. 12.6: Voice Kit microphone (optional) 

 

 

 

Voice Kit configuration under MS-Windows 

To configure the voice kit, use the Control Panel menu 

Audio Settings

. In the expanded view, 

the internal speaker can be configured as well as the external handset speaker (

Expansion

) and 

the microphone. 

With the 

Mute

 button it is possible to activate/deactivate the speaker and the microphone 

individually. 

The option 

Route Micro to Output

 can be used for testing and sends the microphone signal 

directly to the speaker. 

 

 

Voice Kit configuration under Linux 

 

For information on this, please refer to the Advantech-DLoG Linux manual 

available on the Internet: 

www.advantech-dlog.com

 (login required for Linux 

information, please contact 

[email protected]

). 

 

 

 

 

Summary of Contents for DLT-V83 SERIES

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands