Configuration
Page 44 of 122
DLT-V83 Series Manual V1.50
Advantech-DLoG
6.12.
ErP settings for AC devices
The DLT-V83 with AC power supply unit fulfills the EU regulation number 617/2013 on the
implementation of the eco-design/ErP directive 2009/125/EG. This regulates the maximum
standby energy consumption.
To achieve the maximum power savings, certain settings must be made to the BIOS and in the
Windows network configuration.
This power savings is first achieved if the DLT-V83 has run through the BIOS one time and been
shut down in a controlled way.
6.12.1.
BIOS settings in order to deactivate WakeOnLAN
Menu
Setting
Advanced -> Chipset -> South Bridge Chipset
Configuration -> GbE Wake Up From S5
GbE LAN Wake Up From S5:
[Disabled]
Advanced -> Hardware Health Configuration -> Power
Saving
Power Saving: [Enabled]
If
WakeOnLAN
is deactivated, the DLT-V8315 cannot be started from standby mode via Ethernet
(remote).
6.12.2.
MS-Windows settings for deactivating WakeOnLAN
In the
network properties
(
Network Connection Properties
) of the DLT-V8315:
Configure Power Management and LAN Connection so that
WakeOnLAN
is deactivated.
Example: Deactivate WakeOnLAN under WES 7:
Fig. 6.28: Network Connection Properties, Advanced
Figure 6.29: iManager: Network Connection
Properties, Power Management
