BB-VESR90x Serial Servers
8
SERIAL SERVER SETUP AND CONNECTIONS
This section describes how to set up and connect BB-VESR90x Serial
Servers.
Note: In this section, devices to be connected to the serial server’s
serial connection are simply referred to as the “serial device”.
CONNECTING THE POWER SUPPLY
Connect a
DC power supply
to the power terminals on the top of the
serial server. Polarity of the wires is indicated on the label on the side of
the serial server. Acceptable voltages are between 10 VDC and 48 VDC.
The power supply must be capable of supplying 4 Watts.
