3. CONFIGURATION
3.22
Scripts
There is possibility to create your own shell scripts executed in the specific situations. Go
to the
Scripts
page in the
Configuration
section in the menu. The menu item will expand and
there are
Startup Script
and
Up/Down
scripts you can use. For more examples of Scripts and
possible commands see the Application Note
Commands and Scripts
3.22.1
Startup Script
Use the
Startup Script
window to create your own scripts which will be executed after all of
the initialization scripts are run – right after the router is turned on or rebooted. The changes
in settings will apply after pressing the
Apply
button.
Any changes to the
Startup Script
will take effect the next time the router is power cycled
or rebooted. This can be done with the
Reboot
button in the
Administration
section, or
by SMS message.
Example of Startup Script:
When the router starts up, stop syslogd program and start
syslogd with remote logging on address 192.168.2.115 and limited to 100 entries.
Figure 60: Example of a Startup Script
104
Summary of Contents for B+B SmartWorx LR77 v2
