55
AIMB-706 User Manual
C
ha
pte
r 3
BIO
S O
pe
ra
tio
n
PEG Port Feature Configuration
–
Detect Non-Compliance Device
Detect non-compliance PCI Express device in PEG. If enabled, it will take
more time at POST time.
3.2.3.5
PCH-IO Configuration
Figure 3.35 PCH-IO Configuration
LAN1 Controller
"Enable or Disable" LAN1 controller.
LAN1 Option-ROM
"Enable or Disable" LAN1 boot option for legacy network devices.
LAN2 Controller
"Enable or Disable" LAN2 controller.
LAN2 Option-ROM
"Enable or Disable" LAN2 boot option for legacy network devices.
PCIE Wake
"Enable or Disable" PCIE to wake the system from S5. When this item is
selected as "Disabled", Wake on LAN2 function is also disabled.
PowerOn by Modem
"Enable and Disable" PowerOn by Modem
Deep Sleep
"Enable or Disable" Deep Sleep.
Restore AC Power Loss
Behavior when recovering from AC power loss: "S0" (power on), "S5" (power
off), or "Last State".
PCIE Device Initial Delay
Users can set seconds to delay PCIE device initial time.
Summary of Contents for AIMB-706
