Packing List
AIMB-240
Startup
Manual
Before you begin installing your single board, please
make sure that the following materials have been
shipped:
z
1 x AIMB-240 Mini ITX Motherboard
z
1 x CD-ROM or DVD-ROM contains the followings:
z
User’s Manual (this manual in PDF file)
z
Drivers
z
1 x IDE HDD cable (40-pin, pitch 2.54mm)
z
1 x IDE HDD cable (44-pin, pitch 2 mm)
z
1 x FDD cable (34-pin, pitch 2.54mm)
z
1 x Serial port cable with DB9P(M)
z
1 x Secondary port cable 14P FLAT to DB9P(M)
z
1 x I/O shield
z
1 x Startup Manual
z
1 x Rear I/O bracket
z
1 x Warranty card
CPU cooler is not included in packing list. Please note
that AIMB-240 uses socket 479 connector to
accommodate Intel Pentium 4/Celeron socket 478
processor. Please only use Advantech’s certified CPU
cooler.
Installation Note
Signal
PIN
PIN
Signal
F_PWRBTN#
11
12
PWRBTN
*
Power button pin is located in Pin 11&12 of front panel connector.
Retention
Retention module can be found in the cooler box. Please install the retention module correctly to
align with the mark on PCB
