Advantech Wireless SSPBMg-C400-BRE, Installation And Operating Manual, Page: 46 / 46

SSPBMg-C400-BRE
12.3.3 R
ESPONSE
M
ESSAGE
S
TRUCTURE
(SSPB
TO
IDU)
TABLE 15: RESPONSE MESSAGE STRUCTURE
Byte Name Description Value
1 Ad Address of SSPB shifted left by 4 0x10 to 0x dress F0
2 Level Byte 1 x output power MS byte of T -
3 Level Byte 2 LS byte of Tx output power -
4 Temperature perature in °C Hot Spot Tem -
5 Status Byte 1 erature out of range
f lock
OR, 0: normal
OL, 0: normal
,
mal
OFF
Bit 0: Temp
Bit 1: PLL out o
Bit 2: Checksum error
Bit 3: Tx Status
Bit 4 – 7: Power Class
1: O
1: O
1: error in command message
0: nor
1: Tx ON, 0: Tx
0x1 to 0xF
6 Status Byte 2
ion
Bits 0 – 3: Not used
Bits 4 – 7: Software Vers
0xAA
0x0 to 0xF
7 Checksum Algebraic sum of bytes 1 - 6
12.3.4 D
ATA
F
IELD
D
E
1)
x gned integer in 1/100 dBm
FINITIONS
T Power Level: Unsi
2) pu gned integer in MHz (Not applicable for these units)
3) C
4) Pow the Ku-Band are included).
In
Tem t Frequency:
perature: Unsi
Signed character in °
er Class: See table below. (Power levels for
Value 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC
Power 2W 4W 5W 8W 10W 16W 20W 25W 40W 60W 30W 125W
Page 45