Initial start-up
DLT-SA6100 Screen Blanking Solution, Manual V1.00
17 / 27
7.3. Install DLT-SA6100 Screen Blanking Solution software
To install the
DLT-SA6100 Screen Blanking Solution
software, “admin” rights for the
corresponding vehicle mounted terminal are required.
DLT-SA6100 Screen Blanking Solution
installations should only be performed by
qualified, skilled personnel, such as IT administrators.
7.3.1.
Information on different operating systems
The
DLT-SA6100 Screen Blanking Solution
software is installed with menu guidance and
provides the user with identical dialogs in all available operating systems.
Only WinEmbStd7 will display an additional
Windows Security
checkbox that must be
accepted.
7.3.2.
Start installation
Before you start software installation: Please check if
DLT-SA6100 Sensor Stick
is
properly installed.
Close all other applications before starting setup.
Then double-click “ADLoG Screen Blanking 2.0.0 Setup.exe”.
The
Welcome
screen appears:
Figure 7.2: ADLoG Screen Blanking Setup – Welcome screen
Confirm with
Next
.
