Advantage Sentra SK Series, Instruction Manual

Page: 59 / 70

Temperature Control Units : Sentra with VE Series Instrument
Page: 59
Advantage Engineering, Inc.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729 Fax: 317-881-1277
Service Department Fax: 317-885-8683
www.AdvantageEngineering.com
7.4 DUAL ZONE DOLLY
TO PROCESS CONNECTION
FROM PROCESS CONNECTION
WATER SUPPLY CONNECTION
WATER SUPPLY MANIFOLD
WATER SUPPLY MANIFOLD
CASTER
STRUCTURAL STEEL BASE
ELECTRICAL CABINET
WATER SUPPLY CONNECTION
TO SENTRA '1'
DRAIN CONNECTION TO SENTRA '1'
DRAIN CONNECTION TO SENTRA '2'
WATER SUPPLY CONNECTION
TO SENTRA '2'
WATER SUPPLY MANIFOLD CONNECTION
DRAIN MANIFOLD CONNECTION
WATER SUPPLY
CONNECTION
DRAIN CONNECTION
DRAIN CONNECTION
FROM PROCESS
CONNECTION
SENTRA '2"
SENTRA '1"
TO PROCESS
CONNECTION
Molders often need to run different temperatures on each mold half to produce the best quality part.
Advantage can provide a dual zone dolly that holds two standard single zone temperature control units to
meet this need.
The dual zone dolly provides the convenience of a dual zone configuration while providing the economic
first cost and ease of maintenance associated with independent single zone units.
Options:
• Single cooling water supply and drain connection
• Single power supply connections