33
3.2.6.6 View - Network
This Option can be used to obtain diagnostic information when a network is used to connect other panels or
remote terminals. The access level of all panels on the network can be checked from this display:
[NETWORK – Press 0 to Clear] More>
Node Status
1 LOCAL
2 Level-2
3 Level-1
4 -
Additional network diagnostics are available by selecting the “More>” option.
For further information, refer to the Ad-Net network manual (Document No. 680-027).
Pressing
'0'
allows the stored network status information to be cleared.
3.2.7
Time / Date
This function allows the time and date in the panel to be changed. A valid password must be entered before
changes are permitted.
On successful password entry, the display shows the current time and date with confirmation of the day of the
week on the bottom line. For example:
[SET TIME/DATE]
TIME =
15:28
DATE = 15/04/02 MON 15 APR 2002
To change the settings, use the
buttons to highlight the required option. Directly enter the new time or date
using the
number
buttons. As soon as a
number
button is pressed, the display will clear the current setting and
show the new value as it is entered. For example:
[SET TIME/DATE]
TIME = 1
-
:--
DATE = 15/04/02 MON 15 APR 2002
NOTE: The time should be entered in 24-hour format. Invalid times and dates cannot be entered.
3.2.8
Status
Highlight the STATUS option and press the
✔
button to return the display to the normal status display screen.
Alternatively, press the
Esc
button. The normal status display screen will be shown after about 5 seconds.
3.2.9
Lock Controls
To prevent unauthorised access to the control keys and menu functions, highlight the LOCK CONTROLS option
and press the
✔
button to disable the controls.
The display will prompt for confirmation by entering the password.
