www.advancedco.com
12
Remove the two (2) upper middle Regular head screws holding the AX-CTL Base Card to the enclosure back box,
and replace with two (2) metal hexagon spacers (H), provided with the D9068P mounting plate. Install the
remaining two (2) supplied metal hexagon spacers in the two locations directly below the two (2) installed spacers
(H). Do not over tighten metal hexagon spacers as breakage of the spacer can occur. See figure 4
Utilizing four (4) of the Regular head screws provided, install the D9068P mounting plate to the four (4) installed
metal hexagon spacers (R), and tighten securely.
Utilizing the four (4) remaining Regular head screws provided, install the D9068P to the D9068P mounting plate (S),
and tighten securely.
Refer to Section 2.3 regarding AX-SEB mounting and connections.
NC NO COM
SUPERVISORY
NC NO COM
TROUBLE
NC NO COM
FIRE
USB
RS232
PBUS
AUX DC
OUT
BATTERY
O/C OUT
OUT OUT IN IN
+ -
+ -
LOOP-1
LINE 1
HEARTBEAT
LINE 2
SYS TROUBLE
+ + - - A B
1 2 3 4 5
NC C NO
D9068P
D9068P Mounting Plate
H
H
H
H
R
R
R
R
S S
S S
Figure 4 – AX-CTL-1, D9068P Mounting Plate and D9068P DACT Installation