Advanced Poly-Packaging T-200, Operation Manual

Page: 7 / 35

Note: Used to identify important information
CAUTION:
Warning messages. To avoid physical harm, damage to equipment or damage to the product.
Be sure to read these messages carefully.
1.5 Special Features of the T-200
The T-200 has been designed with simplicity of operation and ease of maintenance in mind.
The totalizing counter counts cycles of operation and has a reset feature. Press the reset button at the
beginning of each shift or day to record packaging production.
Patented design seal assembly (Teflon Shield

) - Teflon is only in contact with hot wire during sealing
and is then stripped away from the wire immediately after sealing; reduces contamination buildup,
increases Teflon life and improves seal integrity.
Double or triple seal quickly and easily - Seal the bag a second time or third time by pulling down and
sealing for consistent placement of seals.
Patented Anti-Jam Device - During the loading and sealing operation, this device detects obstructions and
automatically reverses the pressure bar, discontinuing the cycle operation.
1.6 Available Options
Spare Parts Kit: Additional Teflon, heater wire, valve and other components make this kit a must.
See Chapter 4, Section 4.l for recommended Spare Parts Kit.
Special funnels: Send us your product and we will evaluate the loading to determine the best funnel
design.
Bag deflator: Quickly mounts to the sealer bar squeezing the air from the bag while sealing.
1.7 Special Note on Safety
Many safety features have been included in the mechanical, electronic and pneumatic systems of this
machine. Despite these safety precautions, operators may receive lacerations, minor burns, or crushed or
broken bone injuries if they come in contact with any moving components. Improper use, improper
adjustment and neglect of preventative maintenance may result in serious personal injury. No special
personal protective equipment is required to operate the equipment, but eye protection, gloves or other
protection should be worn, depending on the characteristics of the product being packaged and the
method of loading the product.
Please carefully read the following precautions to operate the equipment properly and avoid injury:
General topics regarding safety :
•
CAUTION: Never operate the machine with covers, guards or funnels removed
•
CAUTION: Do not reach under the Lexan guard or into the seal area.
•
CAUTION: Only certified maintenance or electrical personnel should perform maintenance
procedures.
•
CAUTION: Standard tag/lockout procedures include disconnecting air and electricity when
performing maintenance tasks.
•
CAUTION: Do not attempt to reprogram machine.
6