8.2.5.4 3D Map
The 3D map shows the GNSS Compass position on the Earth as well as a red trail of position history. When the
filter initialises the map will automatically reset the view to the GNSS Compass position. To move the camera
click and drag on the map. To zoom in and out use the mouse scroll wheel. To change the camera view right
click and drag or shift click and drag.
8.2.6 View Menu
8.2.6.1 Communications
This dialogue shows statistics on the data packets received from GNSS Compass and can be useful in
diagnosing signal integrity problems.
Figure 41: GNSS Compass Manager Communications Dialogue
8.2.7 Configuration Menu
8.2.7.1 Configuration Export
The Configuration Export dialogue can be used to export all the GNSS Compass settings to a file. This file can
be imported at a later date or on other units. This is useful to restore a unit to a preset configuration at a later
date or for batch configuration of multiple units.
Figure 42: GNSS Compass Manager Configuration Export Dialogue
8.2.7.2 Alignment
The Alignment dialogue is used to set the alignment offsets of the system installation. It is important to set the
values in this dialogue correctly for accurate results.
v2.0
Page 58
04 Nov 2021
GNSS Compass Reference Manual • Configuring and Monitoring GNSS Compass
Summary of Contents for GNSS Compass
Page 1: ...GNSS Compass Reference Manual v2 0 04 Nov 2021 ...
Page 28: ......
