Advanced Navigation GNSS Compass, Reference Manual

Page: 49 / 136

8.1.1.2 Current Time, Position and Heading
This section displays the current UTC time, position, and heading. The data will only be valid if GNSS Compass
has a HEALTHY status, there is a 3D GNSS fix or better, and the Heading is initialised.
8.1.1.3 Altitude Indicator
The Attitude Indicator visualises roll and pitch using a standard artificial horizon. Heading, velocity and height
are shown to the side. All units are SI (metric) and degrees.
8.1.1.4 Satellites Table
The Satellites table shows the number of satellites visible by the primary antenna. More detailed information
can be found in the Satellites screen under the
View menu.
8.1.1.5 Map
The map shows the GNSS Compass position on Earth as well as a red trail showing position history since the
last reset. When the filter initialises the map will automatically reset the view to the GNSS Compass position. To
move the camera click and drag on the map. To zoom in and out, use the mouse scroll wheel.
Use Reset to reset the map view to the current position of GNSS Compass.
Clear History clears the current red trail showing the position history. This will immediately restart from the
current position. Note that this does not affect any logging currently active.
8.1.1.6 Map Controls
Reset
This resets the map view to the current position of GNSS Compass.
Clear History
This clears the current red trail showing the position history. This will immediately restart from the current
position. Note that this does not affect any logging currently active.
Follow
This button makes the map follow the device.
8.1.2 View Menu
The View menu contains the options for viewing pages of data from GNSS Compass.
8.1.2.1 Map
This takes you back to the home page of the web UI with the map display.
8.1.2.2 Device Information
The Device Information page is useful when requesting technical support and for tracking your serial number,
firmware version and hardware version.
v2.0 Page 40 04 Nov 2021
GNSS Compass Reference Manual • Configuring and Monitoring GNSS Compass