Chapter 6
Settings
49
Osmo1
®
Single-Sample Micro-Osmometer User Guide
Figure 70: Both User ID and Sample ID required
6.18 Clearing Osmo1 data
In general, you do not need to clear the databases
manually, because Osmo1 automatically overwrites the
oldest database records. However, that functionality is
available if needed.
CAUTION:
Clearing databases deletes the data and it
cannot be recovered.
Be sure that you want to do this
before proceeding.
To clear the databases manually:
1.
From the Settings menu, open the Service screen as
described in “Exporting Osmo1 data” on page 46.
2.
From the Service screen, select the Databases tab to
bring it to the front (see Figure 63 on page 46).
3.
In the “Table” section, select the database you want
to clear: Results, Events, Users, or Controls.
4.
Double-check that you selected the desired
database; then tap
Clear
.
The system deletes all data from the selected
database.
5.
Tap
Exit
to return to the Settings menu.