Advanced Instruments Anoxomat III User Manual Download Page 20

Chapter 3 

Optional functions

20

Anoxomat® III User’s Guide

3.7 Activating pre-programmed or user-defined recipes

To use pre-programmed or user-defined recipes, press 

Saved recipes

 on the Main screen and choose the recipe.  

The recipe is active and listed on the Main screen.

3.8 Thermal/dot matrix printer

Once you have purchased, installed and activated the 
thermal or dot matrix printer, you can request a printout 
of each recipe run on the Anoxomat.

A detailed printout of each jar can be attached to the 
lids using small clips available from Advanced 
Instruments, thereby eliminating any mix-up of jars.

If the optional Registration Input screen was configured 
and activated in your Anoxomat, the additional 
information is included on the printout.

After a recipe has completed its test, you'll see a prompt 
to print out the recipe. The recipe can also be printed 
out at a later stage. By selecting Print at the bottom of 
the Main screen, you have the option of printing or 
reprinting the last five recipes.

3.9 Data Interface

All data regarding a recipe is stored in Anoxomat 
memory; however, the data memory is limited. When  
the memory storage reaches 60% capacity, a message 
appears reminding you to transfer the data and  
clear the memory. 

Transferring data to a web page

Use this option to transfer the data into an existing 
external system (e.g., LIMS software system) as a CSV 
(comma separated values) file.

1.    

Start your web browser.

2.    

Connect to Anoxomat address. Type 

anox

 and the 

serial number without the hyphen character (e.g., 
anox0312001) in the address bar. 

The serial number can be found on the red protection 
label 

(

Fig. 1.1

)

 and in the Anoxomat Setup screen. 

If you use a fixed IP address, you can enter the IP 
address of the Anoxomat in the address bar. The IP 
address can be found in the Network Settings screen 
(see 

Activating the data interface (optional)

).

3.    

Your Anoxomat web page appears, displaying your 
serial number. Click on 

Recipes

The CSV file is generated and displayed.

Transferring data to a Microsoft Excel® database

The Excel® database provided by Advanced Instruments 
includes search, additional input, and statistical 
evaluation functions. Copy the Excel® file provided on the 
USB memory stick to the computer on which you 
transfer the recipes, and then open the file. The Excel® 
file consists of various tab sheets.

Get data from the Anoxomat

1.   

From the menu bar, choose 

Anoxomat > Get Recipes

.

A pop-up window appears. 

2. 

Enter the name (anox + serial number; e.g., 
Anox0312001) or the IP address (e.g., 172.24.2.17) of 
the Anoxomat, and click 

Ok

Anoxomat's data is transferred to the file in tab sheet 
“RecipesDB”.

Only new data is generated and added to the  
existing data. The Anoxomat memory is not  
cleared automatically.

Summary of Contents for Anoxomat III










































Reviews: