Advanced Energy AE 3TL 1000 Series, Installation And Operation Manual

Page: 17 / 126

• Always be careful around this equipment.
• Never remove the upper inverter lid.
• Safe operation requires correct transport, storage, assembly, installation, and
operation.
PERSONAL SAFETY
Ensure that any personnel entering a safety zone within a four foot area around any
operating inverter wear appropriate Personal Protective Equipment (PPE) as
mandated by national, state, and local authorities.
Medical and First Aid Treatment
Personnel working in and around operating power generation equipment should be
trained in arc flash hazard, fire extinguisher selection and use, first aid,
cardiopulmonary resuscitation (CPR), and automated external defibrillator (AED) use
when each is applicable.
Safety Equipment Requirements
Authorized service personnel performing operations on this unit should have the
following minimum safety equipment available:
• Consult NFPA 70E, or applicable local standards, for PPE requirements on
switch gear operating at less than 600 V
• Electrical hazard footwear (ANSI Z41/Z85 rated)
• Lockout Tagout (LOTO) Kit
• Appropriate meter to verify the circuits are safely de-energized (1000 VAC and
DC rated, minimum)
• Any other equipment as applicable to your operation as required by national,
state, and local regulations
INTERPRETING PRODUCT LABELS
The following labels may appear on your unit:
Advanced Energy® AE 3TL Inverters
570-1003552-05A Safety and Product Compliance Guidelines 1‑3