Advanced Energy Industries AMN PS-2A, User Manual, Page: 14 / 53

5708577-A 1-1
Chapter
AMN PS-2A
Chapter
1
1
Introduction
READ THIS SECTION!
To ensure safe operation, you should read and understand this manual before you
attempt to install or operate this unit. At a minimum, read and heed the “Safety”
section in this chapter.
INTERPRETING THE MANUAL
The following sections describe the type conventions in the manual as well as the
icons and symbols you may see in the manual.
Type Conventions
To help you quickly find what is being discussed, the manual presents certain words
and phrases in type that is different from the rest of the text. We use the following type
conventions:
• Pin and signal names appear in capitalized italics ( DUTY CYCLE.A ).
• Labels that are on the unit (switches, indicators, etc.) generally appear in boldface
capital letters (
MODIFY ); however they appear as you see them on the unit.
Exceptions are port names, which simply begin with a capital letter (User port).
• Commands ( 162 ) and command names ( setpoint ) appear in boldface lowercase
letters.
Icons (Symbols)
This symbol represents important notes concerning potential harm to
people, this unit, or associated equipment. It is found whenever
needed in the manual.
We include this symbol in Danger, Warning, and Caution boxes to identify specific
levels of hazard seriousness.
This box identifies hazards that could result in severe personal injury or
death.