ACR350 Validator with QR Code Scanner
–
User Manual
Version 1.02
www.acs.com.hk
Page 31 of 61
2.4. Turning the Device ON/OFF
2.4.1.
Turning on the Device
To turn the device on
, plug the device’s
power cable
to a
power source
. The validator will
automatically turn on.
2.4.2.
Turning off the Device
To turn the device off, press the
power button
once.
To hard power off the device, press and hold the
power button
for few seconds.
Note:
press the
power button
once to turn on the device after a power off cycle.
The power button is
at the back
of the device, as shown in the image below:
Figure 8
: Power Button
