Advanced Air UK Ltd
Burrell Way
Thetford
Norfolk IP24 3QU
Tel: 01842 765657
Email: [email protected]
2530 CE Series
Smoke Fire Damper
Due to continuous product development Advanced
(U.K.) Ltd reserves the right to change any
information without prior notice
Date
Issue
Sheet
Spec Number
April 2018
C
2 of 34
TS2530CE-01
G:\PRODUCTS\DMP - 2500 Series\05 Product Data\2530\Tech Sub\2530CE\TS2530CE-01 Technical Sub Rev C.docx
Product Details
Blades
Opposed blades, double skinned
Width
136mm standard
Centres
125mm
Material
1.0mm Galvanised Mild Steel – Standard
1.0mm Grade 430 Stainless Steel - Optional
Frame
Frame depth
113mm – with 250mm spigot and 50mm spigot as standard units
with a duct size under 200mm, circular and flat oval spigotted units will be
supplied with additional step down spigots
Material
1.2mm Galvanised – Standard
1.2mm Grade 430 Stainless Steel – Optional
Corners
Welded mitre corners finished with aluminium aerosol spray.
Seals Options
Semi Sealed
Fitted with stainless steel side jamb seals.
(Due to the unique design of the damper blades, blade seals are not
required)
Linkage
External, Zinc electroplated mild steel enclosed with the frame, out of airstream, fixed for
90 degree operation – Standard
Bearings
12.7mm diam. Oil Filled Sintered Bronze suitable for use up to 200°C – Standard
12.7mm diam. Stainless Steel suitable for use up to 650°C - Optional
Axles
12.7mm diam. Zinc Electroplated Mild Steel bolted directly through blade
Jackshaft
12.7mm diameter zinc electroplated mild steel
Side Jamb
Cambered 430 Stainless Steel
Top & Bottom Jambs
Profiled grade 430 stainless steel
Environment
These units are not suitable for installation with a corrosive or hostile environment or an
area of high humidity.
Casing (Ducting)
Class C DW144
Leakage
Electric Control
The 2530CE fire/smoke damper is supplied complete with factory fitted actuator(s). Each
actuator is complete with volt-free open and closed indication micro-switches as standard.
