Chapter 2 Prerequisites for Installation
Installation and Commissioning Manual
51
F
S
P
3000R
7 R
11
.1 8000
0015930
Issue
B
, ©
2012
ADVA AG Optical Netw
orking
ADVA Conf
idential
Equipment Precautions
To prevent equipment damage, use these guidelines when working with equip-
ment you want to install:
•
Install the FSP 3000R7 in a secure location to prevent unauthorized use
and access.
•
Mount the FSP 3000R7 shelf in an approved rack that is fastened on a sta-
ble non-combustible surface.
•
Any unequipped slot in the shelf must contain a dummy module to maintain
cooling and EMI compliance.
•
Any component of this equipment can fall and break if placed on an unsta-
ble cart, stand, or table.
•
Optical fibers can break if mishandled. Permanent damage to the device
may result. Handle fiber with extreme care!
•
Thermal overload can result from covering or pushing objects through the
slots and openings in the shelf.
•
Do not disassemble this product. Equipment can cease to function and the
warranty will be void if disassembled.
•
Disconnect all power and power cords before installing or removing a shelf.
•
Never assume that power has been disconnected from a power source —
always check.
•
Do not perform any action that creates a potential hazard to people or
makes the equipment unsafe.
•
Never install damaged equipment.
•
Carefully check your work area for possible hazards such as:
•
Moist floors
•
Ungrounded power extension cords
•
Missing safety grounds
NOTICE
Electrical damage risks:
(1) Electrical damage can or will result from powering this
equipment with any power source other than the type
indicated on the shelf supply values label.
(2) Electrical damage can result from spilling liquid of any
kind on the equipment.
Risk of ESD damage to the components!
Electrostatic sensitive modules can be damaged by electrostatic
discharge (ESD) during the installation of the equipment. Observe
precautions for handling electrostatic sensitive devices.