Logging On to the Network Element
350
Installation and Commissioning Manual
F
S
P
3000R
7 R
11
.1 8000
0015930
Issue
B
, ©
2012
ADVA AG Optical Netw
orking
ADVA Conf
idential
key to the registry so that you will not SEE this warning the next time
you connect to this NE.
[No]
gives you access to the NE but does not add this NE’s host key to
the registry, therefore you will see this warning again the next time
you connect to this NE.
End of Procedure
Logging On to the Network Element
Before you can configure and monitor the NE, you must authenticate yourself by
logging on to the NE.
To achieve different access rights you must log off and log on with an other user
account and associated password.
Related Topics
See the security chapter in the
Detailed System Description
for an overview of
the factory default user account names and passwords, and the case sensitivity
of the user account names and passwords.
Procedure
Step 1
At the login prompt, enter the relevant user account name.
When the NE is in its initial state, the factory default user accounts are
ADMIN, PROVISION, OPERATOR, MONITOR.
Step 2
Type the relevant password.
When the NE is in its initial state, the password for all factory default
user accounts is CHGME.1.
After entering the appropriate user name and password, the Craft
Console will start immediately.
End of Procedure