Inspecting an FSP 3000R7 Shelf
114
Installation and Commissioning Manual
F
S
P
3000R
7 R
11
.1 8000
0015930
Issue
B
, ©
2012
ADVA AG Optical Netw
orking
ADVA Conf
idential
•
Invoice number of shipper
•
Name of the damaged unit
•
Serial number and item number of the damaged unit
•
Description of damage
•
Effect of damage on the installation
If damaged equipment must be returned to the factory, refer to
“Equipment Return and Repair” on p. 119
. Order replacement equip-
ment, if necessary.
b) If any standard item is missing, notify your ADVA Optical Net-
working customer service representative or ADVA Optical Net-
working immediately.
c) If the configuration of the system is not conforming to the ordered
one, follow your company policy or contact ADVA Optical Net-
working customer service representative or ADVA Optical Net-
working.
For contact details, see the Preface of this guide,
End of Procedure
Identifying Modules
This section describes how to identify modules. The term modules refers to FSP
3000R7 plug-in modules, such as PSUs, channel modules, management,
supervision and optical protection switch modules, optical filter modules, optical
amplifiers and Dispersion Compensation Modules.
Each modules can be accurately identified by its module name, serial number
and item number. Each item number starts with “006370” and consists of ten
digits.