ADTRAN SR905acv User Manual Download Page 82

Page: 82 / 123

DLNA

On this page, you can configure the DLNA (Digital Living Network Alliance) server software.

Note

: You must reboot the gateway to implement any changes made on this page.

1. In the left menu, click

Services

DLNA

. The following page appears.

2. To

enable

this option, click the

slide button

to the right of

Enabled

3. (

Optional

) In the

Server name

field, enter a descriptive name for this network that end users will see.

4. Click the

Apply

button in the

Pending changes...

dialog box to save your settings.

TR-069 Configuration

On this page, you can configure the gateway with details about the management server to which this gateway will be linked.

Note

: You must reboot the gateway to implement any changes made on this page.

Summary of Contents for SR905acv



























































































































Search results

Summary of Contents for SR905acv

Reviews:

Related manuals for SR905acv

Brands by name

Popular brands

ADTRAN SR905acv, User Manual

Search results

Summary of Contents for SR905acv

Reviews:

Related manuals for SR905acv

Brands by name

Popular brands