SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
71
Devices
In this section, you can configure and manage the devices connected to your gateway. You can group and manage LAN devices as
well as Intellifi mesh network devices.
Intellifi Devices
On this page, you can view the Intellifi mesh devices connected to the network.
Note:
To extend the network, you can connect a satellite to a satellite.
1. In the left menu, click
Devices
>
Intellifi Devices
. The following page appears showing a diagram of the connected devices.
This map refreshes every 10 seconds.
If a LAN device is connected via wireless, the WiFi band appears as the name instead of LAN or WAN. The device colors
identify the device mode. See the legend in the
Device Topology
header for details.
There are two views: the simple view (the default) and the detailed view. (The detail view shows the IP addresses for each
device.) Click the
Show
button (at the top right) to switch between these views. This map refreshes every 10 seconds.
If your device is connected via wireless, the WiFi band appears as the name instead of LAN or WAN.
2. To view details of a device, click the device label. The
Device Details
pane appears.
You can edit the host name, click the IP address to log into the device, or click
Internet Access
to pause access to this
device.
3. When finished, close the pane.
