SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
59
DMZ
On this page, you can configure DMZ settings for your gateway. For security reasons, it is recommended that you create a static IP
address for the host server that you enter on this page.
1. In the left menu, click
Network
>
Firewall
>
DMZ
. The following page appears. The WAN IP Address is read-only.
2. To
enable
this feature, click the
slide button
to the right of
Enabled
.
3. In the
Host IPv4 Address
field, select or enter the IP address for which unrestricted Internet access is to be allowed.
Note:
It is recommended to create a static DHCP association to this host address.
4. Click the
Apply
button in the
Pending changes...
dialog box to save your settings.
Port Forwarding
On this page, you can configure a local network device to have unrestricted access to the Internet. This is useful when local network
devices cannot run an Internet application properly behind the firewall. This is also known as
exposed host
or
virtual server
.
1. In the left menu, click
Network
>
Firewall
>
Port Forwarding
. The following page appears.
2. To add a mapping, click the
+ Add Rule
button to the right of the
Port Forwarding
section heading. The
Add/Edit Port
Forwarding
dialog box appears.
