SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
117
Configuring Log Settings
On this page, you can enable remote logging.
1. In the left menu, click
Admin
>
Event Log
>
Log Settings
. The following page appears.
2. (
Optional
) To activate remote logging, click the
slide button
next to
Enable remote logging
. Additional fields appear.
3. In the
Logging server IP
field, enter the IP address (such as 192.168.1.44) of the syslog server to which the log messages
should be sent. Log messages are sent to this server in addition to the default local destination.
4. In the
Log port
field, enter or select the port number for the specified logging server. Options are
1
-
9999
.
5. In the
Log protocol
field, select the protocol to be used for logging. Options are
TCP
and
UDP
. The default is
UDP
.
6. Click the
Apply
button in the
Pending changes...
dialog box to save your settings.
