NETVANTA E1/FE1 NETWORK INTERFACE MODULE (NIM)
P/N 1200868L1
For more detailed documentation, visit us online at
www.adtran.com
Quick Start Guide
Quick Start Guide, 61200868L1-13B, February 2004
ADTRAN Technical Support (+1-256-963-8716)
© 2004 ADTRAN, All Rights Reserved
E1/FE1 NIM C
OMMANDS
clock source
{
line | internal | through
}
Configures the source timing used for the interface.
line*
Recovers clock from the primary circuit.
internal
Provides clocking using the internal oscillator.
through
Recovers clock from the circuit connected
to the DSX-1 interface.
coding
{
ami
|
hdb3
}
Configures the line coding for the E1 physical interface. The settings must match the
line coding supplied on the circuit by the service provider.
ami
Alternate Mark Inversion
hdb3
*
High Density Bipolar 3
description
<text>
Comment line to provide an identifier for this interface (for example, circuit ID, contact
information, etc.).
<text>
Up to 80 alphanumeric characters
framing
{
crc4
}
Configures the framing format of the E1 interface. This setting must match the framing
format provided by the service provider.
crc4
CRC4 framing enabled
loopback-alarm-detect
Enables detection of loopback alarms on the E1 interface. Use the
no
form of this
command to disable loop alarm detection. This setting is enabled by default.
loopback network
{
line
}
Initiates a loopback on the interface toward the network. Deactivate using the
no
loopback network
command.
line
Initiates a metallic loopback of the physical E1 network
interface.
loopback remote v54
Initiates an E1 remote loopback test (with a V54 loopback pattern). Deactivate using
the
no loopback remote v54
command.
remote-alarm
{
rai* | ais
}
Selects the alarm signaling type to be sent when a loss of frame is detected on the E1
receive signal. Choices are
RAI
(remote alarm indication) and
AIS
(alarm indication
signal).
remote-loopback
Enables acceptance of remote loopback requests on this E1 interface. Deny
acceptance using the
no remote-loopback
command. This setting is enabled by
default.
sa4tx-bit
{
0 |
1*
}
Selects
0
or
1
as the transmit value of Sa4 on this E1.
shutdown
Turns off the interface. The
no
version of this command turns the interface on and
allows it to pass data.
snmp trap
{
line-status | link-status
}
Enables the interface to send SNMP traps when there is an interface status change.
tdm-group
<group#>
timeslots
<1-31>
speed
[
56
|
64
]
Creates a group of contiguous DS0s on this interface to be used
during the
cross-connect
process.
<group#>
Number label to identify this TDM group
<DS0 range>
DS0s in this group in the form:
<starting DS0
-
ending DS0>
test-pattern
{
ones | zeros | 511 | qrss
}
Initiates sending the specified test pattern.
ones
Generates continuous ones
zeros
Generates continuous zeros
511
Generates repeating pattern of ones and zeros
qrss
Generates a QRSS pattern test
test-pattern clear
Clears the test pattern error count.
test-pattern
insert
Inserts an error into currently active test pattern.
test-pattern
{
show 511
|
show QRSS
}
Displays current pattern error count.
ts16
Enables timeslot 16 multiframe to be checked on the receive signal.
* Indicates default values.
