ADTRAN NetVanta 2730, Getting Started Manual

Page: 42 / 74

ADTRAN NetVanta 2730 Getting Started Guide Page 37
Viewing the WWAN Connection Status
The Network > Interfaces page allows you to view the current
WWAN connection status.
1. Log into the ADTRAN NetVanta 2730 appliance
management interface.
2. Navigate to Network > Interfaces .
3. In the Interface Settings section, the WWAN interface line
displays the current status as follows:
The following messages describe the status of the WWAN
interface:
Managing the WWAN Connection Status
The Connection Manager window allows you to connect,
disconnect, and view current WWAN connection status.
1. In the ADTRAN NetVanta 2730 appliance management
interface, navigate to
Network > Interfaces .
2. In the Interface Settings section, under WWAN, click the
Manage button.
3. The Connection Manager windows displays your
connection status.
4. If the Connection Manager shows “disconnected,” click the
Connect button. You will connect to a network if one is
available.
On hook Indicates that the WWAN card is present
but not yet connected.
Connected and
starting PPP
authentication Indicates that the WWAN card is associated
and currently attempting a connection to the
WWAN network.
Connected Indicates an active connection.