NetVanta 1600 Series Hardware Installation Guide
Physical Descriptions
61700568F1-34A
Copyright © 2011 ADTRAN, Inc.
19
10/100/1000Base-T Ethernet Interfaces
The front panel contains 48 10/100/1000Base-T Ethernet interfaces (RJ-45). These interfaces are
arranged in stacked pairs, with the numbers
1
through
48
screened from left to right directly above the
corresponding ports. Status LEDs for each stacked pair of interfaces are located directly over the
interfaces. See
for pinouts.
Rear Panel Design
The NetVanta 1638P rear panel is shown below.
Figure 4. NetVanta 1638P Rear Panel Layout
Rear Panel Interfaces
Option Module Slots
The rear panel contains two high-speed option module slots labeled
X1
and
X2
that accept a variety of
high-speed option modules.
NetVanta 500 W PoE Power Supply
The rear panel houses the field replaceable NetVanta 500 W PoE power supply. For information on
replacing the power supply, refer to
Replacing the Power Supply on page 28
RPS (Future Release)
The NetVanta 500 W PoE power supply has a power input to a +12 VDC RPS. The
RPS
LED, located
on the front panel of the unit, indicates RPS status.
EPS (Future Release)
The NetVanta 500 W PoE power supply has a power input to a +50 VDC EPS. The
EPS
LED, located
on the front panel of the unit, indicates EPS status.
Power Connection
The NetVanta 500 W PoE power supply has a power input to the AC universal power supply. Refer to
Supplying Power to the Unit on page 28
for connection details.
®
500 WATT POWER SUPPLY
DISCONNECT ALL POWER CABLES PRIOR
TO REMOVAL OF POWER SUPPLY
CAUTION
AC INPUT
X1
X2
RPS - 12VDC
EPS - 50VDC
1700462F1
