ADTRAN NetVanta 1638, Hardware Installation Manual

Page: 15 / 36

NetVanta 1600 Series Hardware Installation Guide Physical Descriptions
61700568F1-34A Copyright © 2011 ADTRAN, Inc. 15
Domestic shipments of the NetVanta 1638 include the following items:
• NetVanta 1638 base unit
• NetVanta 120 W AC power supply
• A detachable power cable with a grounded, three-prong plug
• Quick start guide
• Two 19-inch rack mounting brackets and eight screws
International shipments of the NetVanta 1638 include the following items:
• NetVanta 1638 base unit
• NetVanta 120 W AC power supply
• All necessary power cords
• Quick start guide
• Two 19-inch rack mounting brackets and eight screws
Domestic shipments of the NetVanta 1638P include the following items:
• NetVanta 1638P base unit
• NetVanta 500 W PoE power supply
• A detachable power cable with a grounded, three-prong plug
• Quick start guide
• Two 19-inch rack mounting brackets and eight screws
International shipments of the NetVanta 1638P include the following items:
• NetVanta 1638P base unit
• NetVanta 500 W PoE power supply
• All necessary power cords
• Quick start guide
• Two 19-inch rack mounting brackets and eight screws
NetVanta 1638
Front Panel Design
The NetVanta 1638 front panel is shown below. Table 1 on page 20 describes all of the LEDs, and
Appendix A on page 33 shows the connector pinouts.
Figure 1. NetVanta 1638 Front Panel Layout
Front Panel Features
Status LED
The STAT LED is located on the upper left side of the unit and indicates the unit’s status.
Redundant Power Supply LED (Future Release)
The RPS LED is located on the upper left side of the unit and indicates RPS status.
®