ADTRAN jobAid+ Total Access 324, Manual

Page: 1 / 4

1
job Aid
D
ESCRIPTION
This Job Aid supports the Total Access 324 Indoor 3rd Generation
Single Family Unit (SFU) Optical Network Termination (ONT). The
illustration above displays the rear of the SFU ONT and a cut-away of
the top depicting status LEDs.
Ports/Connectors
■ 2 POTS Ports
■ 4 Gigabit Ethernet Ports
■ DC Power Plug
■ UPS Connector
■ SC Fiber Connector (located behind the protector panel labeled
“Fiber Port”. Refer to
“Installing Fiber” on page 2 for installation
information.)
Resetting the ONT
A reset button is available if the SFU ONT needs to be rebooted. To
reset the SFU ONT, press the RESET button for 5 seconds or longer.
WARNING
!
All settings will return to Factory Defaults: Registration provisioning
will be lost.
Voice Processing
POTS uses in-band signaling tones and currents to determine call
status (for example, call request). Because POTS allows for the
transfer of audio signals below 3.3 kHz, POTS systems are also used
for modems that allow data transmission (referred to as dial up
connections).
Total Access 324
Indoor 3rd Generation SFU ONT
Ethernet Interface
The SFU ONT supports data service through four 10/100/1000Base-T
Ethernet interfaces via an RJ-45-style connector.
Power
The power feed is 12 VDC. The total power consumption with 4
Ethernet Ports running and both POTS lines off-hook is approxi-
mately 7.2 Watts.
The SFU ONT uses a standard DC barrel-type connector as a primary
power source. A connection for an optional un-interruptible power
supply (UPS) is provided.
Fiber
Fiber is supplied to the SFU ONT using an SC Fiber connection
located behind a removable protective panel.
UPS
The SFU ONT provides an optional connection for a UPS. An UPS is a
battery backup system designed to continue providing power when
the primary power source is lost. Power is supplied to the SFU ONT
by a local power source with battery backup that utilizes the AC
power at the customer premises.
I
NSTALLATION
After unpacking the SFU ONT, inspect it for damage. If damage is
noted, file a claim with the carrier and then contact ADTRAN. For
more information, refer to the warranty.
Installation consists of positioning the SFU ONT either on a desktop
or wall mount, connecting POTS, Ethernet and Fiber, and connecting
power.
CLEI: BVMBN10F_ _
Product P/N: 1287735G3
Issue Date: April 2015
Document P/N: 61287735G3-22B
The following related online documents and resources provide additional information for this product:
Total Access 5000 Series Fiber to the Premises Deployment Guide
Total Access 5000/5006 Engineering Guide
ON/OFF PWR UPS
CLASS ONE
LASER
PRODUCT
POTS2 POTS1
LAN1 LAN2 LAN3 LAN4
RESET
PWR BAT LINK1 LINK2 LINK3 LINK4 POTS2 POTS1 LOS PON
PWR BAT POTS1 POTS2 LAN2 LAN3 LAN4 LAN1 LOS PON
Fiber Port
Documentation for ADTRAN Carrier Networks products is
available for viewing and download directly from the
ADTRAN Support Community website.
Go to:
https://supportforums.adtran.com/welcome
Registration is required.
ADTRAN offers training courses on our products, including
customized training and courses taught at our facilities or at
customer sites.
For inquiries, go to:
http://adtran.com/training