ADTRAN DSU IV ESP, User Manual

Page: 57 / 194

Chapter 5. Configuration Overview
61204011L1-1 DSU IV ESP User Manual 5-3
Figure 5-1. Configuration Menu Tree for Network, DTE, and Test Options
1= Network Opt. 1= Loop Rate 1= Auto
2= 2.4K
1= Local
2= Network Addr. 1= Enter Network 3= 4.8K
2= Address:00 4= 9.6K
Config
5= 19.2K
3= Remote Config 1= Disabled 6= 38.4K
2= Remote
Enter Addr. 2= Enabled 7= 56K
8= 64K
4= Network Type 1= Dedicated
2= AT&T/MCI SW56
3= US Sprint SW 56 1= Master
5= Clock Source 2= From Network
1= 2.4K
1= DTE Rate 2= 4.8K
3= 9.6K
2= DTE Options 4= 19.2K
5= 38.4K 1=Scrambler Off
6= 56K/57.6K 2=Scrambler On
7= Same as Loop 3= Suppress LBE
2= Connector Type 1= EIA-232
2= V.35 1= Async 9 bits
2= Async 10 bits
3=Data Format 1= Asynchronous 3= Async 11 bits
2= Synchronous
4= DTE CMD Option 1= Disabled
2= AT Command Set
5=Transmit Clock 1=Normal 3= V.25 Sync
2= External 4= V.25 BSC/Async
3= Invert
6= CS Options 1= Forced On 1= CS Delay Short
2= Follows RS 2= CS Delay Long
1= Timer Off 3= Follows CD
7= Antistream 2= Time 10 Sec
3= Time 30 Sec 1= Forced On
4= Time 60 Sec 2= Normal 1= Forced On
8= CD Options 3= Off with LOCD 2= Off OOS Only
9 =TR Options - Depends on operation mode. 3= Off LOCD Only
See
Configuring DTE Options on page 7-1 for more information.
4= Off Test Only
5= Off Test + OOS
A= SR Options 6= Off Test + LOCD
1=Test Timeout Enter Timeout (0-Off): 00 Sec 1= RDL Ignored
2= RDL EN/DIS 2= RDL Accepted
3=Test Options
3= EIA LLB EN/DIS 1= Disabled
2= Enabled
4= EIA RLB EN/DIS 1= Disabled
2= Enabled 1= Disabled
5= DBU Answer Test 2= Enabled